DESCRIPTION

Bantape Alu foil Reinforced 3025 CW/R Foil-Scrim backing (Foil: 28u / 2-way scrim 5×5 mm), combined with a transparent high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.

The workable foil applies easily to both fibrous and sheet metal ducts and conforms to irregular surfaces.

Bantape Alu foil Reinforced 3025 CW/R excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.

FEATURES

•  Foil-Scrim backing provides excellent reflec on of both heat and light
•  High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim Facing joints and seams sealing in HVAC ductwork application
•  Good ageing resistance both indoors and outdoors
•  Low moisture vapour transmission rate makes BanTape® RF2825 CW/R an excellent vapour barrier
•  Service Temperature range from -30 ~ +120°C (-22 ~ +248 °F).
  TYPICAL APPLICATIONSHVAC industry for joining and sealing foil-scrim facing laminated fiberglass blanket/duct board/ pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.PRODUCT USEIt is essential that the user evaluate the BanTape® RF2825 CW/R product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BanTape® RF2825 CW/R products between +10 ~ +40 °C (+50~ +105 °F).Surface PreparationIt is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

  Storage & Shelf Life

  18 months when stored at 21 °C ( 70 °F ) / 50% relative humidity out of direct sunlight.

  PRODUCT FORM & SIZE AVAILABLE

  Cut Roll : 75mm (3″) / 100mm (4″)

  Log Roll : 1200mm x 45 / 50m

  Jumbo Roll : 1200mm x 1000m / 1200m / 1350m

  Important Note

  1. The data above are typical values only, and should not be used for specifications purpose.

  2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%
  Download Product Brochure